The holes are plugged in PHP 8.5.12, 8.4.27, 8.3.36 and 8.2.35. For PHP 8.1 and older there are no regular releases with the fix so far, so the only way out is moving to a supported branch. On a regular server, the package manager takes care of that. Docker is a different story: every container brings its own PHP, and that PHP stays exactly as old as the image.

Which container runs which PHP?

So the first question is: which containers on my little home server actually contain PHP? For Nextcloud or WordPress that’s obvious, for self-built images or small web apps less so. Instead of going through every container by hand, the following loop asks all running containers for their PHP version and compares it with the patched releases right away.

for c in $(docker ps --format '{{.Names}}'); do
  v=$(docker exec "$c" php -r 'echo PHP_VERSION;' 2>/dev/null) || continue
  case "${v%.*}" in
    8.5) fix=8.5.12 ;;
    8.4) fix=8.4.27 ;;
    8.3) fix=8.3.36 ;;
    8.2) fix=8.2.35 ;;
    *)   fix=99 ;;
  esac
  if [ "$(printf '%s\n' "$fix" "$v" | sort -V | head -n1)" = "$fix" ]; then
    printf '\e[32m%-30s %-8s ok\e[0m\n' "$c" "$v"
  else
    printf '\e[31m%-30s %-8s anfällig?\e[0m\n' "$c" "$v"
  fi
done

The loop silently skips containers without PHP. For all others, the version shows up in green if it is at least at the patch level and in red if it is below. PHP 8.1, 7.x and older also end up in red, because there simply is no fix for them. The red lines say “anfällig?”, German for “vulnerable?”. On my server, the result looks like this:

$ ./php2shell-simple.sh
nextcloud-app-1                8.5.12   ok
nextcloud-cron-1               8.5.12   ok
linuxundich-test-wordpress-1   8.3.36   ok
planetfoss-web                 8.3.33   anfällig?
sisu-web                       8.4.26   anfällig?

So Nextcloud and the test WordPress had already pulled their updates, while PlanetFOSS and the site for Sisu were still lagging behind. By the way, the question mark after “vulnerable” is on purpose. The loop only compares version numbers. If an image uses the PHP package from Debian, Ubuntu or Alpine, the fix may have been backported without the number changing. In that case, only the distribution’s security advisories can tell you more.

For a closer look, there is php2shell-check by EXT IT. The MIT-licensed script is read-only and judges PHP by package versions rather than just the version number, so it also takes backported fixes into account. It looks into Docker containers, FPM pools and old processes that are still running, and on request sends a harmless request to your website. For the containers it needs root or membership in the docker group.

The project page suggests the usual one-liner with curl and sudo bash. For a script that runs with root privileges on my server, I’m not too fond of that. Better download the script together with SHA256SUMS from the releases, check it with sha256sum -c SHA256SUMS, skim through it once and then start it by hand. According to the developers, a “not vulnerable” is no guarantee, by the way:

$ sudo bash php2shell-check.sh https://eure-seite.example

On my home server I ran the script with sudo. As a member of the docker group it would see the containers without root as well, but running processes of other users and some logs would stay hidden. This is how I fetched and started it:

$ curl -fsSLO https://github.com/EXT-IT/php2shell-check/releases/latest/download/php2shell-check.sh
$ chmod +x php2shell-check.sh 
$ sudo ./php2shell-check.sh 

The verdict matches the loop: planetfoss-web with PHP 8.3.33 and sisu-web with PHP 8.4.26 are vulnerable, Nextcloud and the test WordPress are not. On top of that, it found a stopped container from Tuxsucht that my loop had completely missed:

PHP in docker containers
  [ OK ] container      nextcloud-app-1 (nextcloud:35-apache)
         PHP 8.5.12 (fixed from 8.5.12)
[...]
  [VULN] container      planetfoss-web (planetfoss-web:local)
         PHP 8.3.33, fixed in 8.3.36
         -> Update PHP to 8.3.36 or later (container: pull the new image and recreate)
[...]
  [VULN] container      sisu-web (sisu-web:local)
         PHP 8.4.26, fixed in 8.4.27
[...]
  [WARN] container      php83 (stopped, tuxsucht-php)
         stopped, but its image ships PHP 8.3.33: it comes back vulnerable on the next start
[...]
Summary  2 vulnerable, 3 undecided, 12 warnings, 11 ok

Sure, docker ps only lists running containers, and a stopped container doesn’t accept any requests. But if someone starts it again at some point, the hole is back right away. The script is also very clear about mod_php: all five running containers serve PHP through the Apache module, and the advisory demonstrates a complete attack without login against exactly this setup.

Until you can update, the script suggests a stopgap: set session.upload_progress.enabled=0 and expose_php=0, and keep post_max_size below a quarter of memory_limit. The check from the outside, on the other hand, wasn’t much help. For the two websites, the script only reports that the headers don’t reveal a PHP version and that there is no WAF in front. That says nothing about the patch level, which the script honestly admits.

And how do you update PHP?

Don’t update anything inside the container itself, it would be gone again with the next recreate. Instead, pull the new image in the respective Compose directory and recreate the container with it. For self-built images with their own Dockerfile you need docker compose build --pull, so that Docker also fetches a fresh base image:

docker compose pull && docker compose up -d

Important: of course this only helps if the base image already contains the patched version. According to IT-Connect, the new tags initially even showed up without an image behind them, but by now generic tags such as php:8.3-apache ship the patched PHP. If your Dockerfile pins a fixed version like php:8.4.24-fpm, you have to bump it yourself. Simply run the loop again after the update. Take care of the containers that are reachable from the internet first.

The PlanetFOSS test environment shows what this looks like in practice. Its image is based on php:8.3-apache, and the Dockerfile only adds extensions such as GD and Intl. My deploy script does call docker compose up -d --build, but that doesn’t fetch a new base image, it takes the one from August out of the cache. That’s where the old PHP 8.3.33 came from. Only --pull fetches the fresh version:

$ cd /data/docker/planetfoss
$ docker compose build --pull web
$ docker compose up -d web

After a good minute the new image was ready, and the container ran PHP 8.3.36. The database in the same Compose project stays untouched, because both commands only address the web service. Afterwards the loop shows PlanetFOSS in green, and php2shell-check also reports only sisu-web as vulnerable. The old image is still lying around on disk as a leftover, by the way; docker image prune cleans it up.

$ ./php2shell-simple.sh
[...]
nextcloud-cron-1               8.5.12   ok
linuxundich-test-wordpress-1   8.3.36   ok
sisu-web                       8.4.26   anfällig?

All in all, PHP2Shell is a good example of how self-hosting with Docker is convenient, but the updates don’t come by themselves. heise has collected more details on the vulnerabilities. How to keep containers up to date without a lot of fiddling, I covered in Keeping Docker containers up to date with Dockcheck. How do you keep your containers up to date?

☕ Support Linux und Ich
Thanks for reading Linux und Ich. If you enjoy the blog and would like to support my work, you will find more information on the donation page.

Installing dockcheck

Dockcheck only needs a working Docker installation including Docker Compose (as a plugin or standalone) and a few minor dependencies such as jq and regclient/regctl. If packages are missing, the script installs them itself when needed or prints hints about them.

The installation is as simple as it gets:

$ <strong>curl -L https://raw.githubusercontent.com/mag37/dockcheck/main/dockcheck.sh -o ~/.local/bin/dockcheck.sh</strong>
$ <strong>chmod +x ~/.local/bin/dockcheck.sh</strong>

After that, you can call the script directly:

$ <strong>dockcheck.sh -h</strong>

Info: For this to work, the folder ~/.local/bin of course has to be part of your $PATH variable. If necessary, add the path to your ~/.bashrc or another suitable configuration file.

Using dockcheck

Dockcheck checks the installed container images and updates them if needed. With the -x option, Dockcheck uses multiple processes, which speeds things up considerably. A simple update of all containers looks like this:

### Mit Informationen und Nachfragen:
$ <strong>dockcheck.sh -x 5</strong>

### Alle Container automatisiert aktualisieren:
$ <strong>dockcheck.sh -y -p -x 5</strong>

The parameters do the following:

• -y: Automatic updates without asking for confirmation.
• -p: Removes old, no longer used images after the update.
• -x N: Parallel update processes (default: 1, can be increased for faster updates).

If you want to exclude certain containers, you can use the -e option. That comes in handy when a major update is pending for an important project, or when a container should simply never be updated.

$ <strong>dockcheck.sh -x 5 -e nextcloud,withings-gc-bridge</strong>
Excluding these names:
nextcloud
withings-gc-bridge

&#91;##################################################] 31/31 

Containers on latest version:
authelia
changedetection-playwright-chrome-1
...
wallabag-wallabag-1

Containers with updates available:
1) changedetection
2) immich_server

Choose what containers to update.
Enter number(s) separated by comma, &#91;a] for all - &#91;q] to quit:

Other useful options are:

• -d N: Only update images that are at least N days old.
• -s: Also check stopped containers.

Keeping an eye on updates

Dockcheck makes updating Docker containers very easy, maybe almost too easy. The script installs new container images without any further checks. If an update causes problems or requires manual changes, you won’t notice right away. So it’s a good idea to keep an eye on news sources like This Week in Self-Hosted to stay informed about changes, and not to just blindly run Dockcheck every single day.

☕ Support Linux und Ich
Thanks for reading Linux und Ich. If you enjoy the blog and would like to support my work, you will find more information on the donation page.